Skip to product information
1 on 1

MIDAC+ DIGITAL VERSION WITH BB

MIDAC+ DIGITAL VERSION WITH BB

Brand: COBO-3B6

Code: 1032773

View full details

Product details

Description

Programmable controller with different hardware features for a wide range of applications on mobile machines.

Equipped with extensive connectivity possibilities, it has 22 highly configurable I/O pins, with self-protection and self-diagnosis. Designed with a dual microprocessor architecture with large memory, it can be used as a Master or Slave control unit, and allows certification according to ISO EN 13849.

Technical information

 Technical specifications:
-Microcontrollore: Main CPU: Freescale 16 bit, 50 MHz, Second CPU: Freescale, 8 bit
-Memoria: 16 KB RAM (64 KB for Midac+ LMI); 256 KB FLASH (1000 KB for Midac+ LMI); 4 KB EEPROM 256 KB external serial FLASH for data; 64Kbit SRAM
-Programmazione. Master or Slave mode C Language IEC 61131 (VT3 Development Tool)
-Supply voltage: 8 - 32 V in operation, suitable for direct vehicle battery connection
-Operation during cranking: 5.5 V without rest or ISO 7637-2
-Current consumption at rest: 100 mA @ 12V 50 mA @ 24V
-Maximum current: 16 A @ Tenv = +80 °C max, full load
-Load Dump Protection: ISO 7637-2
Connectivity:
-CAN-bus: 2 CAN-bus, 2.0B high speed, (11 or 29 bit identifier) ,ISO 11898-2 compliant, with or without termination resistor.
-LIN BUS: 1 LIN Bus Master, 2.0
Operating Specifications:
-Storage temperature: -40°C to +85°C (-40°F to +185°F)
-Operating temperature: - 40 °C to +80 °C (from - 40 °F to +176 °F)
-Protection degree: IP66
Mechanical Specifications:
-Container: PA66 reinforced ABS
-Connector: 1 x AMP 35 pin automotive
-Goretex valve. yes
Applied standards:
-EMC standards by 89/336 CE, CE Mark – EMC (Emissioni/Immunità): EN 61000 - 6 - 4 (2006); EN 55011 (RF Emission); EN 61000 - 6 - 2 (2005); EN 61000 - 4 - 2 (Electrostatic Discharge); EN 61000 - 4 - 3 (Radio Frequency); EN 61000 - 4 - 4 (Burst); EN 61000 - 4 - 6 (Conducted disturbance)

Applications

-Controller of small precision proportional hydraulic systems
-Single controller for hydrostatic or electro-hydraulic transmissions
-Controller for small spreaders
-TECU for tractors according to ISOBUS standard
-Controller for excavators or wheel loaders
- Controller for safety applications in general (up to PL-C/D