TERA 7-LE LOW OUTDASH

Monitor with 7” display (WVGA 800×480) with LED technology and 32-bit, 532 Mhz©ARM™ processor.

Designed to meet even the toughest environmental demands. Based on the fast boot Linux operating system, TERA7 LE is the ideal solution for any medium-high range HMI application. It is equipped with CANBUS, USB ports and two PAL/NTSC camera inputs.

It can be equipped with a front panel: without keys; with 15 keys; with touchscreen "glass-on-glass" technology.

Technical specifications:

-Power supply voltage: 8 - 32V (can be connected directly to the vehicle power supply)

-Current absorption: 1.2A max at 12V

-Stand-by mode (low consumption) programmable via software

-Operating temperature: - 30° C ÷ + 70° C (- 22° F ÷ + 158° F)

-Storage temperature: - 35° C ÷ + 85° C (- 31° F ÷ +185° F)

-Protection degree: IP65

-7" WVGA standard active matrix color TFT display, 16M colors

-Resolution: 800 x 480 pixels; dot pitch 0.1905 mm, 16:9

-Viewing area: 152.4 x 91.4 mm

-Backlight: White LED

-Viewing angle: horizontal 160°; vertical 160°

Control system:

-32 Bit, 400 MHz ARM™ core microprocessor

-Memory RAM 128 MB DDR

-128 MB Flash Memory

-4 MB Flash memory for Bootloader

-Watchdog interno

-Internal memory expansion up to 4 GB (SD card)

-Sistema Operativo: Linux Embedded Linux Embedded (tipo di boot: 5 sec)

Connectivity:

-2 CAN-BUS, CAN 2.0B (11 or 29 bit), compliant with ISO 11898-2, speed up to 1 Mbit/s. Available standards: CAN-Open, SAE J1939, ISO 11783 (ISOBUS)

-1 RS232 full UART serial port, 16C550 compatible

-1 RS232 TX/RX serial port

-Resistive touch screen with glass-on-glass technology (optional

-1 USB port on connector

-1 porta Ethernet 10/100 Mbps

-2 PAL/NTSC video inputs

-1 buzzer

I/O resources:

-Integrated 15-key keyboard

-20 configurable analog/digital inputs

-2 high frequency RPM inputs

-9 uscite on/off (0,5A e 1A a 24V)

- Cruscotto per gru a braccio telescopico o a traliccio
- Piattaforme aeree di medie dimensioni
- Trattori agricoli
- Spazzatrici stradali
- Cruscotto per telehandlers